Climate environment test
There will be defects in various aspects of the product in the research and development stage, such as product installation location, use frequency, use environment and other objective conditions will affect the function and performance of the product.In terms of product reliability, environmental reliability is particularly important. It can be said that without environmental reliability verification, product quality cannot be guaranteed.
We have been committed to the testing technology services of product development and production stage reliability and environmental testing, from product technology research and development, design, mass production quality control, to provide one-stop environmental reliability testing, in order to improve product reliability and stability Safety, environmental adaptability and safety, shorten product development and production cycles, and escort.
High temperature test
High temperature test is to test the adaptability of components, equipment or other products to use or store in high temperature environment.
Applicable standards：GB/T 2423.2 、IEC 60068-2-2
Test range：50℃～300℃、≦±2℃ deviation, Internal dimension（mm）550×450×550
Low temperature test
Low temperature test is to test the adaptability of components, equipment or other products to use or store in low temperature environment.
Applicable standards：GB/T 2423.1 、IEC 60068-2-1
Test range：-70℃～0℃、≦±2℃ deviation, Internal dimension（mm）1000×1000×1000
Constant damp heat test
Constant damp-heat test is to test the adaptability of components, equipment or other products in use or storage under certain temperature and high relative humidity environmental conditions.
Applicable standards：GB/T 2423.3 、IEC 60068-2-78
Test range：30℃～99℃、≦±2℃ deviation, humidity range: 20% ~ 98%RH, Internal dimension（mm）1000×1000×1000
Alternating damp heat test
The alternating damp-heat test is to test the adaptability of components, equipment or other products to use or store under humid and hot conditions where the temperature changes circulatively and the surface produces condensation.
Applicable standards：GB/T 2423.4 、IEC 60068-2-30
Test range：-40℃～100℃、≦±2℃ deviation, humidity range: 20％～98％RH，
Internal size（mm）1000×1000×1000
Temperature cycling test
Temperature cycle test refers to the test of temperature cycle of test piece under normal pressure. The main purpose is to expose potential material defects and manufacturing quality defects in products, eliminate early failure and improve product reliability.
Applicable standards：GB/T 2423.34-2012
Test range：-40℃～80℃，Temperature change rate: 1℃/min
In upgrading test
Hot and cold shock test
Rapid temperature change test
MTBF test
......